Deleted WAV recordings from an SD card are recoverable, as long as you act before the card writes anything new. Stop recording immediately. Use card-level undelete software to pull the files back, then repair any that come back corrupted or truncated. You will recover the audio, undelete it, and fix the headers so every file plays.
Stop Using the Card Right Away
Stop recording to the SD card. Every time the recorder or camera writes a new file, it can overwrite the space where your deleted WAVs still sit. A quick format leaves audio data in place until it is overwritten, so even an accidentally formatted card may still hold recoverable recordings. Remove the card from the device and do not use it again until you have run recovery software.
Choose a Recovery Tool
For card-level undelete, you need software that scans the raw data. PhotoRec is a free, open source tool that finds WAV files by the “RIFF....WAVE” signature. It works on Windows, macOS, and Linux. Because it searches by file signature rather than the file system table, it can find deleted files even after a quick format.
Other free tools perform similar signature-based scanning. The principle is the same: the software looks for the characteristic byte pattern at the start of a WAV file and reconstructs the file from the raw card data.
Recover Files with PhotoRec
Before You Start
Always recover to a different drive, never to the card being scanned. Writing recovered files back to the same card risks overwriting the very data you are trying to save. Use an external hard drive, a USB stick, or a folder on your computer’s internal drive.
Step-by-Step Recovery
- Download and install PhotoRec on your computer. It is part of the TestDisk package.
- Connect the SD card to your computer using a card reader.
- Launch the tool. Select the SD card from the list of drives. Be careful to pick the correct drive to avoid scanning the wrong disk.
- Choose the file system type (usually “Other” for FAT/NTFS cards).
- Select the destination folder on a different drive where the recovered files will be saved.
- Start the scan. The software searches for WAV headers and reconstructs files. This can take from a few minutes to over an hour depending on the card size and speed.
- When the scan finishes, check the destination folder. You will find files with generic names like “f0000001.wav”.
The tool does not recover original file names or folder structures. The files are named sequentially based on when they were found.
What to Expect from Recovered Files
Recovered files lose their names and may be truncated or fragmented. Truncation happens when the file was not fully written before deletion or when the end of the file is overwritten. Fragmentation means the audio data is split across non-contiguous areas of the card. The recovery software can handle some fragmentation if you enable the “brute force” option, but it is not perfect.
Many recovered WAVs will open in a media player but play only silence, static, or a short clip. This is because the file header still points to the original, now incorrect, data size, or because the audio data is missing at the end.
Fix Wrong Headers and Truncated Files
Rewrite the Header
A recovered WAV whose header size does not match its real length can be fixed by rewriting the header. The WAV header contains a field that tells the player how many bytes of audio data to expect. If the recovered file is shorter than that value, the player may hang or play noise. If the file is longer, the player may stop early.
Use a Repair Service
To fix this, you need a tool that recalculates the correct data size and updates the header. One option is wav.repair, a free online service that processes WAV files without watermarks. Upload the recovered file, and the service rewrites the header to match the actual audio data length. This works for both truncated files and files with wrong size fields.
If the file is severely truncated, with only a few kilobytes of audio, the repair may not recover audible sound. It will at least make the file playable up to the point where data exists.
Handle Recorder Formatted Cards
If you used the recorder’s “format” function, the card may appear empty, but the audio data is still present. A quick format on most recorders and cameras clears only the file allocation table, not the actual WAV data. The recovery tool can still find the files because it ignores the file table and scans for the WAV signature directly.
After scanning, you may get hundreds of WAV files. Sort them by date or size to help identify the recordings you need. If the recorder uses a custom file system, the tool may still work because it relies on the raw byte signature rather than the file system structure.
Prevent Future Loss
- Always back up recordings to a computer or external drive as soon as possible after recording.
- Do not delete files on the card until you have verified the backup is complete and playable.
- Use a card that is larger than you need so you are less likely to delete old recordings to free space.
- If you must format the card, do a full format (not quick) to overwrite the data, but only after you are certain you no longer need the recordings.
If you do accidentally delete or format, remember the golden rule: stop using the card immediately and recover to a different drive.